WE PRODUCE INdividual FORGED car WHEELS.
Fast delivery to turkey and georgia.

For Vissol wheels production we use 6061T alloy. It is based on aluminum with alloying additives of magnesium, copper, silicon, zinc and other metals, and is mainly used in aircraft industry.

The blank undergoes 2 thermal treatment operations — quenching and tempering to relieve internal stresses in the metal.

Each blank undergoes several pressing operations, after which a solid wheel is formed without any spokes and holes on the facial side.

WHEEL BLANK

THERMAL TREATMENT

PRESSING

A design engineer makes a 3D model in a special program, taking into account all your desires of design, concavity and weight. In order to improve the strength characteristics of the wheel and to make a safe-to-use product, our specialists calculate the maximum load of the wheel and apply a safety margin based on the weight of the car and design features.

Any kind of customisation is possible.

In case your car was tuned or has uknown specifications due to its rarity, you don't need to worry if our wheels will fit your car or not. With a 3D scanner we will get all the dimensions from your car with up to 50 micron accuracy and will make the wheels according to your parameters.

The process starts with uploading the 3D model to the CNС machine.

The blank is put into the Lathe machine to cut the contour of the blank according to a set program in three directions. Around 70% of material is removed by this process.

The design of the front face of the wheel is milled, the holes of the hub, PCD and nipple hole are drilled. Engravings are also applied at this stage. The process lasts from 6 to 30 hours depending on the design complexity.

FIRST STEP - 3D MODEL UPLOAD

SECOND STEP - LATHE TURNING

THIRD STEP - MILLING

Polishing is a manual work and it’s performed in order to increase the adhesion of the paint to the wheel.

The wheels are consequenty put into 8 baths, each bath containing a special chemical solution for degreasing. This procedure is necessary to achieve an ideal result in painting.

POLISHING

DEGREASING

Painting is done manually in 3 stages: priming, painting and varnishing. Colour options are not limited, any colour can be chosen according to your request. Glossy, matte and semi-matte varnishes are available.
Once the painting is finished the wheels are sent to the drying chamber.

ADDITIONAL OPTIONS:

For Vissol wheels production we use 6061T alloy. It is based on aluminum with alloying additives of magnesium, copper, silicon, zinc and other metals, and is mainly used in aircraft industry.

Our production is located in Yaoslavl, Russia.

We produce 18-24 inch diameters.

We do not sell from stock, we manufacture wheels exclusively for each Client and we implement the most unconventional solutions to make your car look truly unique.

We use TUV drawings to ensure the fitment. In case your car was tuned or has uknown specifications due to its rarity, you don't need to worry if our wheels will fit your car or not. With a 3D scanner we will get all the dimensions from your car with up to 50 micron accuracy and will make the wheels according to the measurements.

The wheel weight depends on the diameter, permissible gross weight of the vehicle, safety margin and wheels design. On average the weight of the wheels ranges between 8 and 20 kg based on the conditions mentioned above.

For UAE we can deliver straight to your door or any auto shop of your choosing. For other countries delivery is made to airport terminal.

We provide a life-time warranty for the wheel structure and 1 year warranty for the paint coating. Warranty for wheel accessories is six months.